Loading... Please wait...
Click the image above to see a larger version
  • Dal Prop - Rev3 - Set 4x4.5, 2*CW/2*CCW - Red 0445 - 4 props AU NZ
  • DalProp - Rev3 - Set 4x4.5, 2*CW/2*CCW - Red 0445 - 4 props AU Australia

DalProp - Rev3 - Set 4x4.5, 2*CW/2*CCW - Red 0445 - 4 props

Shipping Weight:
39.00 Grams
Minimum Purchase:
2 unit(s)
Stock Remaining:

Product Description

These are the new Revision3 Dal super strong Prop 4x4.5" high RPM props (Oct 2015) 0445 -   These are well matched to 3100kv CarbonBird motors  

How do they compare?  there is no agreement on props - each pilot will have his own prop story - but Sometimes its annoying to have to do a prop change everytime you have a small incident with a racegate, a hidden branch of a tree or the ground that follows - these props will ensure the "incident"  wont have walking back for tools -  they are ideal for those days when you are exploring, pushing thru leaves and trying new stunts. 

Why are the tips NOT tapered down? Blunt nose/ Bull nose?   This type of hack produces more tip trust at the expense of effiency - so you get "pop" but loose flight time from the bigger tip vortex - the other reason pilots like bull nose tips is they dont normally shatter as easily on impact with the ground - but overall its strength issue rather than an aerodynamic masteroeice


  1. SUPER Strong - this type plastic has a memory - if bent will stay bent - be carefull not to fly without straightening them first - poor tracking (vertical offset) can cause IMU issues
  2. Super light weight 3.4grams/ prop - perfect for rapid speed changes 
  3. 5mm ID bore  
  4. Requires 7.6mm shaft height ; 5mm diameter shaft to mount it.
  5. These are high quality props for a great low price - but you must adhere to safety warnings about props below - always.
  6. require almost NO balancing (always check every prop and use 800 grit wet-n-dry to remove any sharp edges at the leading edge of the blades)


  • 4 Rev3 DALprops 4x4.5" 0445 as you see in Photo 1 at right - RED - 2 CW(R) and 2 CCW


require Balancing - These DAL Props are near perfect as supplied (true centres) - they require  some balancing - you must check each and every prop yourself - BEFORE FLYING - on a balancer  - its up to the user to check and if necessary balance for HD Video
Limitations - Do not exceed the max RPM 25,500 - replace any prop if damaged or crashed - You must understand the risk of flying a Quad with a damaged prop can result in the Multicopter crashing/falling and hurting a 3rd party or yourself - YOU WILL BE RESPONSIBLE for this !  - props can cut - keep away from eyes!  wear safety glasses ALWAYS !
•Keep your PROPS OFF - not installed - until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures -  realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static -  PROPS may start at anytime without warning.  Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe.  PROPS can CUT ! take precautions !  Never fly closer than 30m to/from any person or pet
Question - Can it use this prop on other motors - ?
Check the diameter of your motor shaft is 5mm and the depth between the spinner and the base <7mm or less - then you can pop them straight on.

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Currency conversion