Loading... Please wait...
Click the image above to see a larger version
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6
  • Image 7
  • Image 8
  • Image 9
  • Image 10

4-Balls IMU Naze Naza vibration reduction Mount 45mm centres

Shipping Weight:
188.00 Grams
Stock Remaining:

Product Description

 this PARIS Sirius™ 4-Balls IMU vibration reduction mount kit is engineered by MultiWiicopter.com Australia.  The specific purpose of this device is minimising vibration arriving at any IMU - We know from our R&D that this is the best approach to clean data - longer reliable flights with MultiWii sensors or with dji naza auto-pilots or the Air32 Naze if you have a twitch - and need it solved. If youre experiencing strange inflight "EVENTS" on your IMU - regarless of price or marketing hype -  this device can help you.  While LowPass filters can be used to remove/average ACC data - ok - but in reality the less vibration at the ACC/GYROs the better.  This is especially important for the prevention of un-explained naza/wkm "Flip-Outs" or loss-of-control "events"  3-5 mins after take off (ACC saturation from vibration) or on distant FPV flights where youre not able to monitor the Pilot Warning LED used by dji. wookong-imu-4-balls-vibration-deck-9973b.jpg We recommend this IMU for the SCARAB HUNTER series with 14" props or bigger when combined with the PARIS Sirius™ AIR or the PARIS v5.  Can also be used very effectively to mount a PARIS AIR suspended above the drive shaft for the brushless gimbal.



  • Cleaner data from your IMU
  • mounts to the standard 45mm SQUARE mount hole standard (63.5mm diagonal) used in almost all multicopters such as PARIS autopilots ; Voltair ; andromeda and Scarabs frames
  • Greater tolerance to larger 5->12Kg multicopters with lower Frequency resonance - ie 14" props on a large Scarab Hunter Quad
  • Engineered in AU
  • Direct fit to PARIS AIR unscrew old base and apply new base ; or PARIS Sirius 3v3 IMU (invert the base)
  • Inverted fit for DJI IMU's using VHB 3M FOAM OUTDOOR tape (not included)



1 x High Quality CNC metal mount deck - Fits PARIS Sirius™ AIR ; PARIS Sirius IMU ; or NAZA ; or WookongM IMU

4 x PU GEL ball spheres - extremely resistant to vibration transfer

1 x 2.0mm CarbonFibre X-ring mount 



  • Excludes Compressions bands used on Naza and WookM - For Heavy IMU like metal v2WookM you must compress the balls to 50%
  • scarab-gopro-offset-bracket-0105.jpg
  • Excludes ultra tall stand-offs for Wookong IMU (total 42mm) requires 50mm x 4 Standoffs HERE
  • standoff-multiwii-50mm-wookm-imu.jpg
  • Excludes/Requires assembly - Never pull aggresively on the delicate Gel balls - Push the flanges thru slowly with a round object like you finger pad - dont use finger nails or sharp objects !  Work slowly and patiently.  
  • Excludes VHB 3M FOAM OUTDOOR tape (not included) if using large DJI NAZA or WookM sized IMU - clean all surfaces first with rubbing alcohol wipes 



For PARIS IMU - Use the VHB tape provided to stich the IMU down correctly (in the correct orientation) - be aware a loose or incorrectly orientated IMU is EXTREMELY HAZARDOUS - you must make sure that the IMU remains 100% attached at all times !  Never attach props until AFTER a full running systems check.

Do not modify - Modifaction of an IMU can result in severe issues

Do not combine with INCORRECTLY OVER-GAINED PIDS - PIDS which are set too high result in poor performance, shorter flight times and increased risk of IMU saturation or IMU resonance from noobs gains setting errors


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Currency conversion