FAST delivery in AU 

USD599 ex gst ! stock in Australia - be Quick while stocks last - dji Zenmuse Z15 Panasonic GH3 gimbal (Australia)  for Zuiko 12mm ƒ2 Version lens - Everybody knows the GH3 shoots far crisper images and video in 1080p than the newer GH4 which might claim 4k but is blurry and dull in 1080p - how many shoots are even done in 4K really? not many - GH3 is way cheaper solution - Film Directors have only just begun to realise the potential storyboards they can draw for this new camera gimbal - Jib operators are in a state of panic when their half million dollar booms can be beat by the Z15 - Imagine a gimbal so fast that the human eye cannot detect any camera movement - how could this engineering feat even be done? - simple -> just combine the fastest direct drive stepper motors available on the market with dedicated high speed IMU electronics.  The down side is that the motors are so fast and the torque to achieve this speed is so high  - that the camera and lens combination must be exactly matched to the gimbal - this means the DJI Z15 Zenmuse gimbal is both APSC and Camera and Lens specific.  This is the PANASONIC GH3 OLYMPUS M.ZUIKO DIGITAL ED 12mm f2.0 lens VERSION - The Sony Nex5/7 version is here.  Some film directors want to fly much heavier cameras such as DSLR or Red epic - sure - unfortunately DSLR mass inertia is too high and the vision disappoints - more-over these cams mass push the overall UAV weight off the clock and noise and RISK right up there - the aerodynamics of the multicopter to the Reynolds number can be lost - giving the advantage back to a traditional large RC helicopter which inturn has its own aerodynamic and safety limitations similar to a manned helicopter - watch this video below and decide if the GH2 footage  is the real limitation or is the light weight and low risk of the smaller camera an asset to the film Director - give him/her options they NEVER previously had....  only with Z15

WARNING gimbals MUST be perfectly balanced in 3 axis 100% of the time when powered up - YOU must check this at Pre-Flight - Failure to check balance, adding alternate lenses, lens hoods or jamming motors can lead to motor burn out and jitter and is NOT covered by dji warranty

1. Do not take-off and land in dust or dirt - all operations should me from grass or a purpose use mat to prevent dust ingress to the gimbal - DJI have advised they do not cover damage caused by incorrect use, in the form of dusty take off and landing is at your own risk and NOT covered by warranty
2. Do not operate in salt laden air or marine environments which can cause accelerated corrosion without doing maintenance to remove and protect from salt - if the gimbal is exposed to salt the user must protect all connectors and PCB with INOX - Users failing to conduct regular maintenance with INOX (or similar sprays) will experience corrosion in marine environments and this is NOT covered by warranty as salt is corrosive .

Question - Why is it USD1000 cheaper than the the other gimbals ?

Many of the components in the new GH3 Zenmuse are made from plastic to reduce costs 

Hero Features

• Three Working Modes

  · Orientation-locked control
  · Non orientation-locked control
  · FPV mode (Reset)

• Built-in independent IMU module

• DJI gimbal special servos drive module

• HDMI- AV module

• Wireless video transmission supported

• Camera shutter control supported

• Wide range voltage input supported

• S-Bus/PPM Receiver supported

Includes

1. One x Z15G Zenmuse gimbal GH3 with mounting points for the 155mm 12mm twin rail system - new
   
2. One GH3 HDMI video out connector (provision for FPV/Live film feed for the DOP)
3. Software Updates - HERE

Excludes/Requires

• Requires setup by a person with engineering level technical skills and RC radio setup experience - NOT a consumer device for point-n-shoot
• Excludes the Panasonic GH3 camera and 
• excludes the lens OLYMPUS M.ZUIKO DIGITAL ED 12mm f2.0
• Excludes the Aircraft S1000 
• Excludes the Flight control system Wookong M is recommended
• Excludes Video Tx
• Excludes OSD