Australia FeiyuTech WG2 all-weather splashPROOF 3 Axis Gimbal - AU stock
Nothing worse than the risk of rain or splashed water to deter you, so you get cautious and leave your gimbal at home, resulting in shaky footage - so finally that rain worry is over - an all weather gimbal - The WG2 is verified IP67-Level waterproof with its enhanced structural water resistance. It can even work half a meter underwater, good for bike riding, motorbikes, dirt bikes, kayaking, boating and filming in the rain.

AUTO-ROTATION advanced TimeLapses - Tilt and Yaw !
The WG2 can follow a planned PAN+TILT rotation route that has been set manually, making complicated time-lapse photography easy - click mode 4 times ; (beep) move it to the start tilt pan position (A) you want ; CLICK (beep) move it to the end position (B) you want - Click ; it starts from A.   In the App you can set the speed of transition from 15 secs to 8 hours.

360 ° ROTATION via BLE phone App
The WG2 restructures its industrial design to enable 360 degrees limitless rotating in both tilting and rolling axes. The Feiyu ON App offers BLE control for remote smooth selfie PAN or tilt reveal shots on location, enabling creative videos.

WIDE CAMERA COMPATIBILITY
with a built in Slide-Lock ROLL axis Balance bar - you can balance the roll axis without tools, making it compatible with GoPro 5 or GoPro 4/GoPro 3+/GoPro 3 without backpack LCD ; or YI 4K/SJCAM/AEE and cameras of a similar size to GoPro. The maximum payload is 130g. It is also compatible with the water sealed Hero4/5 Sessions using the supplied alternate GP Session mount bracket (included).

BUILT-IN POWERFUL Li-on BATTERY
The WG2 can runs for 1 -2 .5 hours with its built-in lithium battery, easily charged after the action is in the bag, by connecting for 2-3 hours with the supplied USB Micro cable - to your laptop or power-brick USB charge ports (excluded)

OPTIMIZED SPORTS ALGORITHMS
FeiyuTech engineers optimized the algorithm for wearable stabilizer scenes,  Improving the anti-jamming / computing ability of the gyro/acc sensors in high-frequency jitter and high-speed sports situations.

COMPACT BUT POWERFUL
The WG2 is compact and lightweight, with impressive torque in all three motors to resist shakes experienced in action sports

What's in the box?

Features

• All weather Wearable and mountable 3-axis gimbal stabilizer (USB rubber seal-plug must be closed first)
• Supports GoPro HERO5 Black and similarly-sized cameras (see Specifications)
• Supports GoPro HERO Session 4 or 5 via included adapter
• Optimized algorithm for wearable operation
• Unlimited 360° pan and tilt rotation, 60° roll angle rotation
• Auto-rotation mode with assignable travel route for video capture and time-lapse photography
• 2.5-hour built-in 1500mAh battery
• Includes Feiyu ON app for iOS and Android - download it for free
• Rain and Fresh Water waterproof to depths of 1m for approximately 10 minutes, and 0.5m thereafter for short periods - excludes SeaWater exposure - NOT designed for ocean ops ; if accidently exposed to salt water be sure to immediately rinse in bucket of fresh water to remove all salt ;
• do NOT spray with a hose or high pressure water ; do not dive, or thow or drop into water as pressure of impact can break the seals.
• Splashproof - can be used in rainy weather, wet activities in fresh water
• Folds away into compact neopreen style carrying case - with travel lock

Instructions

• Charge the gimbal by USB for 2 hours or until the front LED turns from RED to GREEN = charged ; remove the charge lead
• Mount and balance the GoPro/Yi camera (lock/slide mechanism)
• Seal the USB port bung to prevent water ingress
• Turn on the camera - then turn on the gimbal - long press ON/OFF/Mode side button until you hear the tones ; Off is the same hold button in until you hear the tones.

Excludes

• excludes a 1/4" SSteel bolt - can be purchased HERE
• excludes a 1/4" mount plate for your custom DIY mount rig - HERE

NOTE ; Maintenance - Not designed for sustained exposure to salt or salt water - like any underwater camera gear or dive gear it MUST be soaked and rinsed carefully in fresh water to dissolve and remove SALT, after use.