Loading... Please wait...
Click the image above to see a larger version
  • Image 1
  • Image 2
  • Image 3

Vibration PU Gel dampener - 3mmx100mmx36mm - self adhesive - IMU and Camera

Shipping Weight:
33.00 Grams

Sorry but this item is currently unavailable.

Please check back at a later stage.

Stock Remaining:
Out of stock

Product Description

These are 100mmx36mm @3mm thickness pads of special PU Gel (Polyurethane Gel Elastomers) CarbonBird brand - designed to isolate high frequency vibration from IMU sensors in PARIS Sirius™ the WookongM IMU or the NAZA ; also effective as base pads for CMOS cameras such as GoProHeroHD2 without the underwater housing .  PU Gel is self adhesive - peel-n-stick-once material ; in some applications also requires compression of 1g to work well, such as an elastic retaining band if stored sideways - ie If subjected to periods of tension (pulling) or shear force it can come unstuck.  However it can also be washed in fresh water and allowed to air-dry to regain its adhesive properties.

Its befits of reducing junk vibration data spikes in CPUs is a major safety feature. 


  • Very good vibration Isolation of high frequencies typical in multicopters/RC Helicopters -  in compression - for objects up to 150grams 
  • 3mm thickness
  • self adhesive - water washable
  • suitable for Sirius IMU ; NAZA IMU ; Wookong M IMU
  • Can be cut to size with sharp scissors before removing protective cover
  • 12g
  • 1 x pad (green/black)
  • 1 x protective film - peel once - dispose


  • Must be used in conjunction with full Prop balancing and motor balancing techniques 
  • Does not turn a shake-master noob vibration platform into a silk carpet by magic - ! 
  • No not drill - the drill will bind to the gel and pull the gel INTO the hole permanently damaging the gel 
  • Excludes rubber band or elastic band to apply compression - this is not required if the surfaces are well prepared and 1g is maintained


  • Surface must be FLAT ; free of protrusions or bumps, dirt, moisture,chemicals, oil, finger marks, other adhesives
  • Peel-n-stick to a FLAT surface 
  • Apply pressure for 1min - apply 2g for 24 hrs (rubber band) to cure
  • Keep under storage conditions of 1g (gravity) 

Write your own product review

Product Reviews

  1. Vibration dampener

    Posted by Michael on 26th Apr 2016

    Awesome stuff this I use it for everything better then 3m in my opinion

Currency conversion