Loading... Please wait...
Click the image above to see a larger version
  • Image 1
  • Image 2
  • Image 3

QuadOcta Multicopter Frame plate 175mm - Top - Full Carbon fibre 2mm

Shipping Weight:
146.00 Grams
Stock Remaining:

Product Description

New for 2013 - Removeable Centre-section TOP plate - Easy boom changes or boom installation when travelling !!! - instant access to all wires on the Voltair or ESC's and motor wires - undo 4 M3*5 screws - access all areas of the Scarab without the need for a stripdown !

SCARAB Quad/Octa 175mm Aerial photography airframe frame plate - Top Plate ->  used in pairs - can be combined with older bottom plates to upgrade/convert a small 100mm SCARAB Armour or Reconn to a full-house aerial photography airframe - and still use all of your existing SCARAB hardware investment -  it can be configured as a large super-ridged AP Quad with 4 x 66g 775kv Carbonbird motors on 4S  9050 props ;  or as an Octa 8 x 29g Carbonbird 1220 kv motors on 8x4.5 - compatible with our SCARAB 12mm boom based products.


  • Top (upper) 8*45° booms Frame plate - Top - 2mm thickness 100% Carbon Fibre 3K weave - 45mm hole for MultiWiiCopter PARIS® and 75mm hole to fit the 100m Quad plate (see 2nd photo at right)  - overall dimensions 175mm diagonal/peaks
  • Centre mount holes are compatible with electronics 45mm square
  • 54grams - carbon is lighter , yes - but has virtually NO FLEX - super strong = gello free video
  • Designed and manufactured by us - all rights reserved © design - not available on any other website
  • Outer and inner sections - allow easy maintenance or boom change
  • includes 4 x M3*5 SS screws 

Shipping is by Fedex/DHL only - any order with this CF part by Airmail will be cancelled and refunded only.   signature/Tracked orders only

All Carbon fibre is machine cut and may have slight scratches and sharp edges - these can be finished with a few minutes and a diamond file used for finger care - NOTE : these are real 100% 3K 90° CF fabric weave all the way through - not fake heli veneer carbon you see on many helicopter frames which claim to be Carbon but only have a veneer!!  Becuase the Centre section is bigger than the outer section it has to be cut from a separate sheet - hence the reason its slight more expensive than a lower deck.

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Currency conversion