Loading... Please wait...
Click the image above to see a larger version
  • Scarab Gimbal - GoProHeroHD in waterproof case - roll axis level mechanism
  • Scarab Gimbal - GoProHeroHD - roll axis level mechanism

Gimbal - Single axis for GoPro - roll axis level mechanism - photogrammetry

Shipping Weight:
155.00 Grams
Stock Remaining:

Product Description

This is the SCARAB™ servo Roll gimbal  Ideal for Yi 4K or GoPro Session 5 - For perfect LEVEL photos in photogrammetry - set your GoPro to intervalometer and land with hundreds of LEVEL horizon shots - without the need for expensive and un-necessary brushless gimbals.  Designed for vertical photo ops - camera facing down. 

  • Total weight with servo 109 grams


  • Includes Roll gimbal hardware parts
  • Includes Metal Gear servo CarbonBird 
  • Includes GoPro male triple flange bracket
  • M3 bolts to mount the servo x 4
  • Ball-link roll change rod/2 rod ends/2 ball ends
  • Carbon fibre 26mm servo tray - holder
  • Stainless Steel M5 bolt & Nylon M% bolt (lighter)
  • Down-loadable Gimbal assembly manual - HERE 
Fits with -  Fits directly to these frames 
  • Ideal for SCARAB™ TriiKopta, QuadOcta,,YSiix, Recon
  • Can also be used with Foamy Survey RC planes in the nose or front section DIY
  • Cameras - Fits any GoPro camera where the MASS is inline with the ROLL Axis - GP4 Black for example in a GP frame, or any Chinese clone such as Yi using the same GoPro style gripper



  • Excludes PARIS Sirius™ Gimbal IMU controller - HERE
  • For forward facing video add the OFFSET bracket HERE
  • REQUIRES a electrolytic Cap - sold HERE
  • TOOLS are here - You will need a 1/16th Scarab frame tool Hex ; 1.5 mm hex tool ; 2mm hex tool ; file or diamond file ; Blue Loctite® ; sidecutters ; Servo centering device
  • Requires thin cyno
  • You will need to supply your own GoProHeroHD camera - with its original housing - requires some deburring and 1 drop of oil
  • In MultiWii 2.3, the gimbal TILT angle , TILT_PROP and ROLL-PROP the rate to match the tilt of the copter to the servo tray tilt is now in the GUI, not in the code like 2.2
  1.  in the GUI 1st tab ; activate the CAMSTAB boxes (choose alway on (3 white as shown)  or by switch set only one box to white)  - press WRITE
  2. multiwii-camstab-settings.jpg
  3. a new tab called SERVO will appear next to that called SERVO - in that tab press GIMBAL and then READ 
  4. Now set the value you require to toget the correct ROLL and centre point - then SAVE

 Servo Roll Controller is HERE

Its a balance compromise as always to keep simplicity and fast code
    /* Gimbal smoothing : anti-jitter gimbal smoothing for AP  */
    #define GIMBAL_SMOOTHING          //Uncomment to enable gimbal smoothing 
    #define GS_DEADBAND       5       //PWM Deadband. Within this variation servo output is locked
    #define GS_LIMIT          35      //PWM limit. Above this fluctuation, smoothing is disabled. Higher = more smoothing / but starts to introduce more stepped changes

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Currency conversion