Loading... Please wait...
Click the image above to see a larger version
  • Image 1
  • Image 2
  • Image 3

Prop Adapter 5mm - Reversed side - screw down set CarbonBird

Shipping Weight:
35.00 Grams
Stock Remaining:

Product Description

These are our OEM 5mmCarbonBird™ Prop adapters reversed side (bell side) - these type of adapters allow somebody who does not have any skill to strip the motor & reverse the steel motor shaft, to attach a prop to the opposite side.  They fit all CarbonBird 28mm diameter motors


Dimension & Data

  • Weight 8.2grams with screws 
  • OEM Carbonbird™ aluminium collet 
  • fits CarbonBird motors with 4*12mm diameter mount points
  • OD 17mm *8mm height offset from motor to prop
  • Suit props of 4mm- 8mm depth - 5mm bore  - otherwise you will need to add another washer which is NOT included


  1. To fit - apply a small drop of Loctite to the 4 M2 holes in the motor - attach the 4 phillips screws
  2. Allow to set overnight
  3. Apply the prop with 5mm bore
  4. Tighten down the spinner (nut) by hand - spin the motor to check it spins tru 
  5. Then - be VERY carefully using tools NOT to bend the shaft over from excess forces applied only to one side - ie gripping a large 11mm spanner and heaving on it from on side will damage it.   Its far better to place a 3mm Protool tru the spinner and then tighten from boths side equal force. 


  • 5mm Prop adapter for CarbonBird 28mm diameter motors 
  • 5mm washer - red
  • 5mm Spinner (11mm spanner ; or 3.0mm tool pass-thru)
  • 4*M2 screws - phillips  head



Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Currency conversion