Loading... Please wait...
Click the image above to see a larger version
  • Pro Photography Props Set 9"x5.0 CW/CCW - triples Set of 8 - GWS 9050  AU NZ USA
  • Pro Photography Props Set 9"x5.0 CW/CCW - triples Set of 8 - GWS 9050
  • Pro Photography Props Set 9"x5.0 CW/CCW - triples Set of 8 - GWS 9050  Australia

Pro Photography Props Set of 8 - 9"x5.0 CW/CCW - triples - GWS 9050

Shipping Weight:
205.00 Grams
Stock Remaining:

Product Description

GWS Australia 9050 lite-weight 9 x 5.0" triples props - a matching set of 4 x CW(R) and 4 x CCW(standard) low pitched GWS9050 multicopter props.  These GWS 9050 and 9050R are the bomb on 4S 750-800kva motors for Multicopters.  They are very easy to balance with tape on a magnetic balancer and run extremely smoothly. Once you have worked out the balance for one - they are all the same.  The real bonus of these props over the 2 bladed slow flyers is they hold their tip tracking at much higher RPM, yet they are so light they chage RPM very rapidly and have NO gyroscopic-precession feedback when twisted rapidy - as you would when doing hard manoeuvres in a Multicopter - Sure we all know they wives tales about triples being hard to balance - and we are aware that two bladers are more efficient - but after doing a lot of real world perfrmance and balancing tests - we HIGHLY recommend these for 4S 750kv CarbonBird motors - and Gello Free filming when balanced out.


  1. Balance one - and all the rest are the same
  2. Soft flexible ABS plastic - black - good for fast forward flight and smooth video
  3. Super light weight 10.1grams - perfect for rapid speed changes to stabilise multiwiicopters
  4. Suits low Kva motors 750-800kva on 4S
  5. 6mm ID with front/rear 9.40mm OD inserts
  6. Requires 9.5mm shaft length to mount it.
  7. GWS 9050 - original GWS


  • 8 props as you see in Photo 1 at right - 4 CW(R) and 4 CCW
  • 8 x sets of inserts/pairs - 5mm
Balancing - all props require balancing to function correctly for Aerial Photography - use balance tape for static and dynamic balancing - do not exceed the maximum RPM - do a staic test to check before flying.
€¢ Keep your PROPS OFF - not installed - until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures -  realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static -  PROPS may start at anytime without warning.  Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe.

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Currency conversion