Loading... Please wait...
Click the image above to see a larger version
  • HQ Prop Set 5"x3, 4*CW/4*CCW - Orange/black AU NZ
  • HQ Prop Set 5"x3, 4*CW/4*CCW - Orange/black
  • HQ Prop Set 5"x3, 4*CW/4*CCW - Orange/black
  • HQ Prop Set 5"x3, 4*CW/4*CCW - Orange/black
  • HQ Prop Set 5"x3, 4*CW/4*CCW - Orange/black
  • HQ Prop Set 5"x3, 4*CW/4*CCW - Orange/black
  • Image 7

HQ Prop Set 5"x3, 4*CW/4*CCW - Orange/black

Shipping Weight:
95.00 Grams

Sorry but this item is currently unavailable.

Please check back at a later stage.

Stock Remaining:
Out of stock

Product Description

These are the new HQ Prop 5 x 3 high RPM props (July 2014) -  2 sets (black/orange) of 4 x CW(R) and 4 x CCW(standard) low pitched multicopter props.  These are specifically matched to 2400kv CarbonBird motors on 3S.  amazingly -  They require almost NO balancing - They are tough and quite.  The orange pros are normal flown at the back to give an aircraft front/back reference in line of sight LOS.


  1. Quiet - suitable for indoor or urban Ops
  2. Strong ABS plastic
  3. Super light weight 2.7grams/ prop - perfect for rapid speed changes - required to stabilise multiwiicopters
  4. Suits 2300-2400kv - 3S - CarbonBird® motors or T-Motor navigator with 5mm hub - To use these effectively your mini must be less than 400g total with everything on board.
  5. 5mm ID lip  - 3MM/4MM/5MM/6mm inserts included (you would have to drill ou the lip with a reamer to use 6mm
  6. Requires 7.1mm shaft height ; 5mm diameter shaft to mount it.
  7. These are high quality props for a great low price - made by HQ Prop - have passed all our MultiWiicopter tests - but you must adhere to safety warnings about props below - always.
  8. require almost NO balancing (always check every prop and use 800 grit wet-n-dry to remove any sharp edges at the leading edge of the blades)


  • 8 props as you see in Photo 1 at right - 4 CW(R) and 4 CCW ( half the set is orange/half of them black - the orange is NOT dayglo, but more of a see-thru orange)  you can either run mixed sets or all orange or all black on your Quad.


less Balancing - These HQProps are near perfect as supplied (true centres) - they require almost no balancing, if any at all - However you must check each and every prop yourself - BEFORE FLYING - on a balancer - we found none in 4 set needed balance - but its up to the user to check and if necessary balance for HD Video
Limitations - Do not exceed the max RPM 29,500 - replace any prop if damaged or crashed - You must understand the risk of flying a Quad with a damaged prop can result in the Multicopter crashing/falling and hurting a 3rd party or yourself - YOU WILL BE RESPONSIBLE for this !  - props can cut - keep away from eyes!  wear safety glasses ALWAYS !
•Keep your PROPS OFF - not installed - until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures -  realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static -  PROPS may start at anytime without warning.  Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe.  PROPS can CUT ! take precautions !  Never fly closer than 30m to/from any person or pet
Question - Can it use this prop on other motors - ?
Check the diameter of your motor shaft is 5mm and the depth between the spinner and the base <7mm or less - then you can pop them straight on.

Write your own product review

Product Reviews

  1. Quality Props

    Posted by Kevin on 7th Aug 2015

    As always multiw//copter only sell quality products these props are the best.

  2. Tough & inexpensive 5x3 props

    Posted by Dennis Greenfield on 20th Feb 2015

    I use this prop on my 250 quad. The first four I have fitted have been so tough they have withstood several bouts with hard floors, trees and obstacles. There are a few little cracks and chips on the tips but because of their flexibility they are still going quite well after a month of usage. Be sure to install the adapter plug for better strength and stability. I use 1806 - 2300 motors sometimes on 4s and these props go very well.

Currency conversion