![]() |
![]() |
![]() |
The FrSky TFRSP can handle 6-8 channels via CPPM and then 2-4 SERVO channels for gimbal ops - very popular for DJI/3DR PixHawk FUTABA 14SG pilots who use Ch 1-7 for the Naza/Wookong/PX4 and then insert Gimbal inputs into pins marked Ch8/9/10 - TFRSP is compatible with the Futaba 14SG FASST series radios. The TRFSP is a Full Range Radio Receiver. This C-PPM (also called PPMSum) is usable for reducing wirings to PARIS Autopilot UAV systems and also has a RSSi (PWM) pin as well - useful for PARIS v5 MegaOSD or PARIS AIR HERO v2 because you can access the first 8 Ch by CPPM single wire - then access channel 9 and Ch 10 for Alexmos gimbal tilt and roll. Note that ch 1-4 cannot be accessed by traditional servos - only Ch5-10.
Compatibility
Futaba FASST 2.4G Air Systems (on your Futaba 14SG Select 7CH Mode/ or for 10 channels use Futaba MultiMode) Futaba 8 FG, Futaba 14SG
Specifications
NOTE : Servos are not to be plugged into Channel CPPM or Channel RSSI, otherwise servos will get hot or may burn out
Note 2 : For NAZA / Scarab pilots coonect only one 3 pin wire from NAZA x2 -> CPPM pin and select PPM on the NAZA GUI
Bind procedure
Turn on the transmitter, connect the battery to the receiver while pressing receiver’s F/S button. When the RED LED goes off and the GREEN LED is solid (normal function lock) , the binding process is completed.
Includes - printed instructions
Below is one way to use this TFRSP with a PARIS v5 with iOSD built in, and a Scarab 2 axis brushless gimbal Black and get 8 + 2 channels - including a video switch for 2 cameras on-board the Reconn FPV Video Quad
This video presented by one of our open-source customers - his views are at expert level but do NOT represent the only way to do things or even the right way
open source respects all views and independent thinking, shared.