Loading... Please wait...
Click the image above to see a larger version
  • Image 1

DJI Retractable landing gear - UPGRADE kit - LITE - from Fixed gear to retract

Shipping Weight:
1,600.00 Grams

Sorry but this item is currently unavailable.

Please check back at a later stage.

Stock Remaining:
Out of stock

Product Description

This is the S800 retractable landing gear UPGRADE kit LITE.  These are for existing S800 owners ONLY - wanting to upgrade fixed gear to RETRACT - you will need to strip down your gear and rebuild it with these parts

screen-shot-2013-02-11-at-1.16.28-pm.jpg         when finished your retracts will look like this -      


  • RETRACT FREELY GIVING A 360 DEGREE VIEW   The retractable landing gear will not block the view of the camera lens, making smooth shooting in all directions possible. Gone are the days of seeing any part of your S800 in a shot.
  • rls-2.jpeg
  • INNOVATIVE DESIGN WITH A STABLE STRUCTURE   The creative design of the over center locking mechanism ensures the landing gear maintains a fixed/locked position even when there is a power failure. The innovative design makes the structure stable and reliable.
  • EASY SETUP & OPERATION   In order to avoid complex operation, the S800 retractable landing gear is designed to give simplified setup and operation. You can just use any 2-position switch channel to control the landing gear.
  • EASY CALIBRATION   Install the servo arm according to the instructions and then calibrate in accordance with the LED indicator, the adaptive function of travel calibration makes it easy to calibrate. After calibration, both left and right legs are in the lowered position, and the LED is on solid green. Then the landing gear is ready for use. The system is delivered ready calibrated.
  • green-led-1.jpeg
  • WIDE VOLTAGE INPUT    The S800 retractable landing gear has a built-in BEC module, which is compatible with a 3S-6S Lipo battery. It can be powered independently or from the S800 center frame.
  • HIGH EFFICIENCY & LOW POWER CONSUMPTION    The retractable landing gear only consumes power when retracting or lowering, under other conditions the system is automatically in standby mode, which greatly reduces the system power consumption and improves the system efficiency.
  • FAILSAFE PROTECTION    If the switch channel on the TX has fail-safe function, set the fail-safe value to the lower position, so that the landing gear will be lowered when the receiver enters failsafe, to land the aircraft safely.
  • SAFETY PROTECTION AT STARTUP    When powering on the system, if the TX switch is in the retract position, which is the unsafe signal for the landing gear, the LED will quickly flash RED. The landing gear will not retract until you toggle the TX retract switch.
  • red.jpeg
  • SERVO BLOCK PROTECTION      If the S800 retractable landing gear is obstructed for a long time during retracting or lowering, then the system will start the servo block protection function to protect the servo from damage.
  • Servos
  • Servo control board - overload protection
  • Skids - legs - S800 subframe - fibreglass battery tray
  • above items come partly assembled and need to be finished by the user - manual is HERE
  • Requires and existing set of fixed S800 landing gear !  then upgrade...
  • Excludes Z15 gimbal 
  • Excludes Camera
  • Excludes CF utility shelf
  • Excluded LiPo batteries for S800
  • Excludes labour to connect the wires to the Rx or 2nd Rx if used ; programming of failsafe down position


  • Working Voltage 3S~6S (LiPo)
  • Working Current Max [email protected]
  • Working Temperature -20~70°C
  • Total Weight 875g
  • Working Parameters
  • Input Signal PWM (High-Pulse Width 800us~2200us)
  • Output Signal PWM(Neutral Position is 1520us) in 90Hz
  • Output Voltage 6V
  • Servo Travel 150° (Minimum 120° )

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Currency conversion