Loading... Please wait...
Click the image above to see a larger version
  • Dal Prop Set 6x4.5, 2*CW/2*CCW - Red 0645 AU NZ
  • Dal Prop Set 6x4.5, 2*CW/2*CCW - Red 0645 AU NZ
  • DalProp Set 6x4.5, 2*CW/2*CCW - Red 0645 Australia

DalProp - Rev3 - Set 6x4.5, 2*CW/2*CCW - Red 0645 - 4 DAL props

Shipping Weight:
30.00 Grams
Stock Remaining:

Product Description

These are the new Revision3 Dal super strong Prop 6x4.5" high RPM props (Oct 2015) 0645 -   These are specifically matched to 2400kv CarbonBird motors on 3S on Scarab 270 Air Knife-mini - 6x4.5 for extreme speed fast flying FPV or racing.  amazingly -  They require almost NO balancing - They are tough and quite.  

How do they compare?  there is no agreement on props - each pilot will have his own prop story - but Sometimes its annoying to have to do a prop change everytime you have a small incident with a racegate, a hidden branch of a tree or the ground that follows - these props will ensure the "incident"  wont have walking back for tools -  they are ideal for those days when you are exploring, pushing thru leaves and trying new stunts.  


  1. SUPER Strong - this type plastic has a memory - if bent will stay bent - be carefull not to fly without straightening them first - poor tracking (vertical offset) can cause IMU issues
  2. Super light weight 4grams/ prop - perfect for rapid speed changes 
  3. Suits 2400kv - 3S - CarbonBird® motors or T-Motor navigator with 5mm hub 
  4. 5mm ID bore  
  5. Requires 7.0mm shaft height ; 5mm diameter shaft to mount it.
  6. These are high quality props for a great low price - but you must adhere to safety warnings about props below - always.
  7. require almost NO balancing (always check every prop and use 800 grit wet-n-dry to remove any sharp edges at the leading edge of the blades)


  • 4 props 6x4.5" as you see in Photo 1 at right - RED - 2 CW(R) and 2 CCW


requires Balancing - These DAL Props are ok as supplied (true centres) - they require  some balancing - However you must check each and every prop yourself - BEFORE FLYING - on a balancer   -   its up to the user to check and if necessary balance for HD Video
Limitations - Do not exceed the max RPM 25,500 - replace any prop if damaged or crashed - You must understand the risk of flying a Quad with a damaged prop can result in the Multicopter crashing/falling and hurting a 3rd party or yourself - YOU WILL BE RESPONSIBLE for this !  - props can cut - keep away from eyes!  wear safety glasses ALWAYS !
•Keep your PROPS OFF - not installed - until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures -  realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static -  PROPS may start at anytime without warning.  Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe.  PROPS can CUT ! take precautions !  Never fly closer than 30m to/from any person or pet
Question - Can it use this prop on other motors - ?
Check the diameter of your motor shaft is 5mm and the depth between the spinner and the base <7mm or less - then you can pop them straight on.

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Currency conversion