Loading... Please wait...
Click the image above to see a larger version
  • Image 1

Carbonbird™ Motor part - Shaft - OEM - for 888kv 775kv 1/8th" 3.17mm 46.6mm

Shipping Weight:
17.00 Grams
Stock Remaining:

Product Description

Replacement motor part - 1 x CarbonBird™ Motor shaft . 1/8th" 3.17mm - OEM CarbonBird™ replacement part - Fits the 775kv 888kv series CarbonBird motors.


  • High quality steel shaft 
  • Two circlip detent grooves
  • One Grub screw flat section - Use a Dremel tool to extend the keyway "flat" if required
  • size - the 3.17mm 1/8" shaft -   46.6mm long
  • Circlip detent spacing 12mm


1 x shaft only 3.17*46.6mm 


  • NOTE : These are slightly longer than the shaft used in the smaller 1175 motors which are only 44mm long
  • Setup Tip : Always use loctite carefully in the grub screw - the smallest drop is correct amount - wipe away excess - do NOT allow loctite to enter bearings
  • Exclude tools - requires a flat surface , hammer, 3 mm tap, 1.5mm Allen key, Circlip pliers, long nose pliers, Dremel tool, Oil, loctite™ blue

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Currency conversion