Loading... Please wait...
Click the image above to see a larger version
  • ESC YEP 80a for Fixed Wing drones 3-6s  Australia FPV
  • ESC YEP 80a for Fixed Wing drones 3-6s  AU NZ USA
  • ESC YEP 80a for Fixed Wing drones 3-6s  AU NZ USA

ESC YEP 80a for Fixed Wing drones 3-6s Active FreeWheel

Shipping Weight:
42.00 Grams
Stock Remaining:

Product Description

Australia stock - 80a YEP ESC for Fixed Wing iNAV FPV - 3-6s - Perfect for Zeta Fx-79 or Zephyr Mk2 class/sized RC Drones.


  • 80a ESC with ACTIVE FREEWHEEL !! - activated by program card (sold Here) - active freewheel makes a huge difference to efficiency at 50% mid throttle where FPV wings typically spend a lot of time running in cruise flight - ideal for long endurance FPV
  • Powerful 5.5V/6A Switching BEC
  • Super fine throttle resolution provides first-rate and highly accurate linearity  
  • Super smooth adjustable start-up mode 
  • Constant RPM mode (governor mode) for helicopters
  • Adjustable F3A brake  
  • 3 steps adjustable normal EMF brake   
  • High anti-interference capability
  • Low voltage cut-off protection with automatic adjustment for NiCd/NiMH/Li-Ion/LiPo/LiFePO4   
  • Soft cut-off option at low voltage, slows motor RPM gradual rather than hard cutoff (LVC)
  • Low voltage cut-off can be disabled   
  • Variable cut-off voltage / cell     
  • Active free-wheeling circuit allows for unlimited "partial load" capability 
  • LED status display   
  • Adjustable motor timing from 0° to 30°   
  • Blocked rotation protection (senses a jammed motor and stops motor rotation)   
  • Motor reversing from ESC (no need to change ESC/motor wires)  
  • Over-temperature protection and overload alarm   
  • Throttle signal lose protection. If the signal is lost for 3 seconds, the power will automatically cut-off.   
  • Safe power-on. (Motor will not start until throttle is returned to lowest position) 



Max Cont Current: 80A
Max Burst Current: 100A for 10 seconds
Input Voltage: 2-6 cells lipo -XX or 6-16 Ni-MH/Ni-Cd battery
BEC: 5.5V/6A Switching BEC
PWM: 8~16 KHz
Max RPM: 240,000rpm for 2 Poles Brushless Motor
PCB Size: 50x30mm
Weight: 70g (including wires)

Includes -

includes 80a YEP ESC with bare wires - requires soldering



**YEP Programming card is required to change setting here

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Currency conversion