Loading... Please wait...
Click the image above to see a larger version
  • iNav servos uBEC CarbonBird™ 5v 3 Amp switching AU USA
  • iNav servos uBEC CarbonBird™ 5v 3 Amp switching AU USA

uBEC CarbonBird™ 5v 3 Amp switching for iNAV airplanes wings

Shipping Weight:
28.00 Grams

Sorry but this item is currently unavailable.

Please check back at a later stage.

Stock Remaining:
Out of stock

Product Description

Carbonbird iNav 3 Amps switching uBEC USD2.99 ! you won't find a better price -   delivers the full rated 3 amps 5v  at continuous at 95% efficiency on every flight with minimal RF noise.  Do confuse this uBEC with the other noisy uBECS. 


  • Size  43mm*17mm*7mm (L*W*H)
  • Weight  11g
  • Input Voltage  5.5V-26V (2-6 cells lithium battery pack or 5-18 cells NiMH /NiCd battery)
  • Output voltage 5.2v ±0.2v (5.0-5.4v) depending on load ; or 6.0v ±0.2v
  • Designed with an advanced switch mode DC-DC regulator IC
  • Battery polarity reversal protection
  • A metal shield covers almost all the electronic components, and a specially made filter is attached with the output wires to significantly reduce the electromagnetic interference
  • An indicator (LED), lights when the output is in normal range.
  • Includes 3a uBEC with JST plugs
  • Includes optional RC Servo power connector / wire if required
INSTALL : for best results position the uBEC 75mm away from any other device & use the ferrite coil supplied on the out wires.
About 6v operation - Be aware that you can only use 6v for SERVOS with iNAV IF YOU SEPARATE the servo 6v Vcc (red wires)  from the AIR3 FC 5v Vcc (Red wires).  you cannot feed 6v to the FLight controller.  To activate 6v solder closed the jumber on the lower side of the uBEC.


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Currency conversion