Loading... Please wait...
Click the image above to see a larger version
  • Graupner 14x8 L CW E-Prop 1326.14 x 8L AU NZ USA
  • Graupner 14x8 L CW E-Prop 1326.14x8L AU NZ USA
  • Graupner 14x8 L CW E-Prop 1326.14x8L AU NZ USA

Graupner 14x8 L CW E-Prop 1326.14x8L

Shipping Weight:
228.00 Grams
Stock Remaining:

Product Description

High RPM Super-Nylon Prop suited to Multicopters running very High RPMs with strong MOTOR cooling as a feature of the design.  The low tip loading and solid inboard root airflow this prop gives extra stability compared to other designs - Made in Germany by Graupner these props by design have very steep inboard section and rapid taper chord-wise - provides slightly less thrust overall compared to a similar hover flyer prop (spoon) but provides superior high-speed fast forward flight in multicopters due to the high 8" pitch.  Very Rigid & strong prop -  Suits experienced prop balancing FilmMaker - not for Noobs doing film Ops.


  • 14x8" L CW (36cmx20cm)
  • Super Nylon for strong leaf/tree resistance if encountered
  • Low inertia mass 34.4g
  • Bore = 8mmID - insert ID = 8mm (for metal inserts - sold separately when required) - has a 10mm step and a 12mm step if using a prop reamer tool
  • Requires 11mm shaft DEPTH on prop adapter to be available - to mount it
  • Suits Tiger 3515 motor on 6S with approx 400kv - used in larger 5-10kg multicopters

WARNING : Props can cut !! Due the the large size and strength - be aware these props must be treated with care due to risk of injury !! - All multicopter should be operated 30m away from persons



1 x 14x8L eProp Graupner - (L) CW 1326.14x8



Requires balancing by the pilot - this includes 2D chord-wise balancing and span-wise balancing using a prop-balancer HERE - not suited to Noobs for this reason.

Requires a 8mm OD Prop Adapter or shaft here for smaller shafts - not included



Excludes training on how to balance props for video Ops

Excludes Prop Collets /Prop adapters which comes with the motor itself

Excludes any bushes/inserts - Please note the bore is 8mm - 6mm insert here - 5mm insert here


• Keep your PROPS OFF - not installed - until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures -  realise that for a Noob skiping or out-of-order set-up steps or moving sticks, or even static -  PROPS may start at anytime without warning.  Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe.  When operating props remain clear of the spinning arc plane - at all times wear eye protection.

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Currency conversion